Application: Suitable for waste paper and waste plastic recycling industry, used for packaging waste plastic (ground film, packaging bags, PET bottles, etc.), yellow paper, old books and newspapers and other types of waste paper. Suitable for national circular economy parks, national urban mineral demonstration bases, agriculture, papermaking industry, etc.
Applications
Suitable for waste paper and waste plastic recycling industry, used for packaging waste plastic (ground film, packaging bags, PET bottles, etc.), yellow paper, old books and newspapers and other types of waste paper. Suitable for national circular economy parks, national urban mineral demonstration bases, agriculture, papermaking industry, etc.
Features
Hydraulic drive, adjustable working force, low noise, easy and safe operation. Novel steel frame structure, horizontal installation of oil cylinder, sturdy structure, can be equipped with conveyor belt according to customer requirements, with the advantages of convenient feeding and more feeding at one time. If the package of a single package is too small, multiple feeding and compression can be performed. Touch screen, button dual operation operating system, PLC control, simple and easy to learn, reliable performance.
Waste paper baler control method
In automatic mode: the length of the package can be set according to the number of times of pressing on the touch screen. The factory setting of this machine is 5 times, and the user can set it according to the actual situation; when the set package length is reached, the equipment pressing action will stop working, and the buzzer on the control cabinet will remind the user to manually thread the wire.
After pressing the stop button in automatic mode, it is necessary to switch to manual mode, continue pressing several times to reach the required package length, and complete subsequent work such as tying, and then switch back to automatic mode to start the next work cycle.
Equipment use and precautions
(1) It is strictly forbidden to clean the material and wipe the machine during operation. When the material is stuck by the machine, it should be stopped immediately for processing. Two or more people should have clear division of labor to prevent accidents caused by confusion.
(2) It is strictly forbidden to twist the parts, pumps, meters, valves, etc. on the machine at will. Adjustment and repair must be performed by experienced technicians who are familiar with this manual.
(3) After the package is pressed into place, it should be tied up. Only after the tying is completed can the small door be opened to avoid danger.
Suitable for waste paper and waste plastic recycling industry, used for packaging waste plastics (ground film, packaging bags, PET bottles, etc.), yellow paper, old books and newspapers and other types of waste paper.
Model |
Main cylinder pressure |
Feeding port size |
Bag size |
Bag weight-waste paper box |
Motor |
Conveyor belt width |
HPA-125 waste paper machine |
125 |
2200×1100mm |
1100×1250mm |
790-1250 kg |
74.5kw + 7.5kw |
1600mm |
HPA-125 Fully Automatic Horizontal Non-metallic Baler
Parameter content |
Remark |
|
Main pressure cylinder |
Nominal thrust 1250kN |
250T |
Clamping cylinder |
Nominal thrust 800kN |
80T |
Clamping cylinder |
Nominal thrust 800kN |
80T |
Wire Push Cylinder |
Nominal thrust 80kN |
8T×2=16T |
Wire cutting cylinder |
Nominal thrust 80kN |
16T |
Feeding port size |
1100×2200mm |
Width × Length |
Block size |
1100×1250mm |
Width × Height |
Hydraulic system working pressure |
25MPa |
|
Briquetting density |
≥450kg/m³ |
|
How it works |
Single, fully automatic |
|
Equipment output |
10~12T/h (corrugated paper) |
|
Total power of equipment |
74kW+7.5kW |
Conveyor included |
Power specifications |
380V/3PH,50Hz |
|
Note: Product technical parameters are subject to change without prior notice, and actual parameters are subject to the contract agreement